Jual Lcd 16x2 16 X 2 Alpha Numeric




Berat
100 gram
Deskripsi
Barang murah kualitas bisa diandalkan.
Lcd 16x2 16 X 2 Alpha Numeric

Jual Transparent Casing Kotak Transparan Acrylic Box For Arduino Uno R3





  • Berat
    70 gram
  • Deskripsi
    Harga satuan utk Kotak Acrylic nya ya
    **Tidak termasuk Arduino UNO**

    Kotak Acrylic Transparan utk menyimpan Board Arduino UNO R3

    **Kelebihan:
    - Terbuat dari bahan acrylic grade A berkualitas tinggi
    - Dipotong dengan mesin high precision, sesuai ukuran standar Arduino UNO
    - Melindungi papan Arduino Anda dari kerusakan, debu dan goresan
    - Ukuran: 79.5 x 64.5 x 21 mm
    - Sudah termasuk baut

Jual Shield Lcd 1602 For Arduino Uno dan Mega





  • Berat
    100 gram
  • Deskripsi
    Product Description

    This is a 162 LCD Keypad module for Arduino board.
    Uses HDLCD,
    Uses 4 Bit Arduino LCD Library LiquidCrystal
    For the demo code, please change control pin to ta -7
    Extra buttons control connects on A0 arduino pin, can use it control the LCD, analog value read on this pin.

Jual Arduino Uno R3 Smd Improved Version Ch340 + Pin Header + Kabel Usb




  • Berat
    70 gram
  • Deskripsi
    Barang murah kualitas bisa diandalkan.

    Microcontroller ATmega328
    Operating Voltage 5V
    Input Voltage (recommended) 7-12V
    Input Voltage (limits) 6-20V
    Digital I/O Pins 14 (of which 6 provide PWM output)
    Analog Input Pins 6
    DC Current per I/O Pin 40 mA
    DC Current for 3.3V Pin 50 mA
    Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
    SRAM 2 KB (ATmega328)
    EEPROM 1 KB (ATmega328)
    Clock Speed 16 MHz

Jual Arduino Mega 2560 R3 Improved Version Ch340 + Kabel Usb





  • Berat
    70 gram
  • Deskripsi
    Microcontroller ATmega2560
    Operating Voltage 5V
    Input Voltage (recommended) 7-12V
    Input Voltage (limit) 6-20V
    Digital I/O Pins 54 (of which 15 provide PWM output)
    Analog Input Pins 16
    DC Current per I/O Pin 20 mA
    DC Current for 3.3V Pin 0 mA
    Flash Memory 256 KB of which 8 KB used by bootloader
    SRAM 8 KB
    EEPROM 4 KB
    Clock Speed 16 MHz
    Length 101.52 mm
    Width 53.3 mm

Jual Arduino Uno R3 DIP + kabel USB





  • Berat
    70 gram
  • Deskripsi
    Microcontroller ATmega328P
    Operating Voltage 5V
    Input Voltage (recommended) 7-12V
    Input Voltage (limit) 6-20V
    Digital I/O Pins 14 (of which 6 provide PWM output)
    PWM Digital I/O Pins 6
    Analog Input Pins 6
    DC Current per I/O Pin 20 mA
    DC Current for 3.3V Pin 50 mA
    Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader
    SRAM 2 KB (ATmega328P)
    EEPROM 1 KB (ATmega328P)
    Clock Speed 16 MHz
    Length 68.6 mm
    Width 53.4 mm

Jual Modul SENSOR API 5 WAY FLAME SENSOR 5 CHANNEL FIRE FIGHTER ROBOT


Deskripsi
Spesifikasi:
1. Five channel flame sensor design, wide range of detection (the detection range of the ordinary single flame sensor is probably about 30Degree, as the distance increases, the range is gradually reduced, the detection range of the product is greater than 120Degree)
2. Able to output a digital signal (high and low), easy to use
3. Able to output an analog signal (voltage signal), the measurement signal can be more accurately, the occasions for high precision
4. All five outputs status indicator, so whether debug or bring great convenience in the practical application of
5. Digital output detection distance analog output sensitivity adjustable, more flexible design
6. Using 1% resistor design, signal output is more accurate, suitable for the needs of high-precision measurement
7. Onboard M3 mounting holes for easy installation
8. 3.3V-9V power supply, and is compatible with most of the minimum system

Prinsip Kerja Sensor:
The item is able to detect the flame band respectively in the range of 700-1100 nm, short-wave near-infrared (SW-NIR), and is output via an electric signal (voltage signal).

Jual Modul PAM8610 Amplifier 2x15w



  • Berat
    40 gram
  • Deskripsi
    ***Kelebihan:
    1. Memakai chip DIODES Inc terbaru PAM8610
    2. Memakai komponen SMD high precision resistor, dengan toleransi +/- 1%
    3. Layout PCB multi layer dengan ground plane terpisah untuk memastikan S/N ratio yang tinggi, dan tingkat noise yang rendah.
    4. PCB menggunakan material Fiberglass dengan ketebalan 1.6 mm, double-sided board.
    5. Bahan PCB kualitas terbaik
    8. Menggunakan capasitor power tipe Low impedance suara lebih dinamik.
    9. Voltage controlled volume control. Pengaturan volume menggunakan tegangan, tidak perlu khawatir keausan potensio, noise dan gemeresek akibat potensio yang aus/ kotor tidak akan terdengar.
    10. Menggunakan sealed potensiometer. Lebih tahan lama dan tidak mudah aus/kotor.

    ***Spesifikasi:
    1. Power input: 2.1x5.5 mm DC jack
    2. Power Output: 2x10w (8 ohm) dan 2x15w (4 ohm)
    3. Tegangan kerja: 6-15 V (optimal 12V DC)
    4. Rentang frekwensi: 20 Hz - 15 kHz
    5. Quiescent current: 20 mA
    6. Efisiensi: 90%
    7. Speaker Impedance: 4-8 ohm
    8. Fitur: low noise, low distorsion
    9. Ukuran PCB: 45x48x18 mm
    10. Proteksi: overload, overtemperature, anti pop up protection

    Modul amplifier ini memiliki konfigurasi BTL, negatif speaker tidak boleh disambung dengan ground.

Jual Modul Kit Sensor Ultrasonic Hc-sr05 HY-SRF05 Sensor Jarak Pengukur Jarak Akurat







  • Berat
    30 gram
  • Deskripsi
    Barang murah kualitas bisa diandalkan.

    Spesifikasi Sensor Hc-sr05 HY-SRF05

    Catu Daya: 5V DC
    Arus pada moda siaga: < 2mA
    Konsumsi arus saat deteksi: 15 mA
    Lebar sudut deteksi: 15
    Jarak deteksi: akurat hingga 1 meter, dapat mendeteksi (namun kurang presisi) hingga jarak 4 meter
    Resolusi : 3 mm (perhitungan dari faktor kecepatan rambat suara dan kecepatan MCU pada 16 MHz)
    Dimensi: 45 x 20 x 15 mm

Jual Modul USB to TTL CH340







  • Berat
    30 gram
  • Deskripsi
    USB2.0 To TTL 6Pin CH340G Converter for STC for Arduino PRO Instead of CP2102 PL2303
    Built-in USB to TTL Transfer chip.
    Designed to be used for USB to TTL electronic projects.
    TTL interface output, easy to connect to your MCU.
    Dual 3.3V and 5V Power output, work with 3.3v and 5v target device.
    The mini module is designed specifically for STC download and for ARDUIN PRO, supports all series of STC microcomputer with cold start reset button

    Supports WIN7/VISTA/MAC/LINUX(32 bit /64 bit system)
    USB to TTL conversion board used for STC microcontroller download DVD/ hard disk / router /GPS upgrade
    For STC Download: SCM must be a minimum system and external crystal oscillator

    Note: USB to Serial port can use the version above STC-ISPV3.94 to download the old version of STC microcontroller, as STC89C and STC12C series

    Size:5x1.7cm(apprxo)
    1USB 2.0 To TTL 6Pin CH340G Converter